|
Tubing
Distribution and Micro Tubing - Small diameter,
poly and vinyl tubing for emitter and micro sprinkler connections.
Available in common or custom sizes. Hydraulic control tubing also
available.
Supply Tubing - Polyethylene and vinyl tubing in
sizes from .455 through 2.325 O.D. in coils from 50'-1000'.
Flatube - Polyethylene tubing shipped in a
flattened configuration, rounds out when pressurized. Provides similar
flow characteristics as round tube, reduces shipping costs and warehouse
space.
I.P.S. Flexible Vinyl PVC Pipe - Virtually
indestructible, heavy duty pipe for use as risers or swing risers.
Available in 1/2", 3/4" and 1" I.P.S.
Soflex - Spiral reinforced solvent weld hose that
combines lighter weight and greater flexibility, but with greater
working pressures than standard IPS Flex hose.
Poly Riser Softube - Extremely flexible (even in
cold temperatures) special blend in .690 O.D. x .490 I.D. and .700 O.D.
x .500 I.D. polyethylene tube for flex risers. Use with API barbed
fittings.
Poly Riser Funny Pipe - Tough, polyethylene flex
riser pipe in .690 O.D. x 490 I.D. Use with API barbed fittings.
Back to Top
Filters
Plastic Spin Clean® - Available in 3/4",
1", 1 1/2", and 2" sizes with unique self-cleaning
spinning action that cleans the stainless steel screens clean even under
the most severe conditions. Maximum 150 PSI pressure rating.
Steel Spin Clean® - 2" through 12"
epoxy-coated carbon steel , with sintered stainless steel screens. Spin
cleaning action ensures efficient handling of the most difficult
filtration problems for agriculture, industrial and large turf systems
operating at 100 to 2800 GPM.
Back to Top
 |
Flush Water Reclaim Screen - Agricultural
Products' new Flush Water Reclaim Screen (FWRS) saves water.
Filter Flush water with heavy contaminant loads are no longer a
disposal problem. With the FWRS, flush water is converted into
clean water that can be pumped directly into the irrigation system
or returned to the source where appropriate. |
T Filter - Low profile design with black or clear
debris basin, having a 3/4" MPT drain with cap to suit a wide range
of applications.
Screens - Replacement screens in appropriate mesh
sizes are available for all API filters.
Back to Top
Fittings
Full Flow Compression Fittings - Heat and
chemical resistant, glass-reinforced polypropylene or PVC fittings
provide full flow to a wide size range of drip tubing.
Spin Loc Fittings™ - Reusable, glass reinforced
fittings fit into and lock onto drip tubing. Locking sleeves thread
tubing wall for a secure grip. Heat and chemical resistant.
Tape Loc™ Fittings - Specially designed
for use with thin-wall trickle tapes. Creates heat and chemical
resistant, leak-proof connection.
Back to Top
Air Vents
Double Acting and Continuous - Allow air to
escape pipelines during system startup, preventing air locks and water
hammer, which could cause damage to the system. Also permit air to
re-enter pipelines at shutdown, preventing vacuum effects.
| MODEL
NUMBER |
| ARV - 2 |
| ARV
- 1 |
Back to Top
Accessories
Saddles - Bondable socket or quick disconnect
options for use with large diameter (2" through 12") IPS PVC
pipe. Eliminate the need for tees.
Grommets - Provide a take-off for barbed fittings
from PVC pipe to tape and poly tubing.
Adapters - Permit transitions from various
threaded or glueable pipe and tubing or hose ends to commonly used drip
connections. Several configurations available.
Pressure Regulator - Allows precise adjustment of
pressure for emitters, mister or mini sprinkler systems, helping devices
operate at maximum efficiency.
Caps, Stakes, Plugs, Hole, Punching Tools - A
wide variety of flushing end caps, tubing stakes, mistake plugs and
strong, tool-grade plastic punches for tubing are available from API.
Back to Top
|
