|
FEATURES
- All rubber
parts are made from specially selected peroxide cured compounds that
outlast parts made from commonly used sulfur cured compounds when
exposed to reclaimed water.
- Teflon coating
of 400 series stainless steel solenoid parts (including plungers) to
protect against attack by chlorine.
- Internal bleed
valve for manual operation. A simple flip of a switch is all that is
required for on/off operation.
- To protect the
solenoid chamber against the intrusion of particulate matter, the
4000 valve is equipped with an internal self-flushing filter as well
as a self-cleaning metering rod so only "clean" water can
enter the solenoid chamber.
ADDITIONAL
FEATURES
- Top is
epoxy-coated purple for reclaimed water identification.
- Solid brass
construction. Water-proof solenoid coil guaranteed for life of
valve.
- Coil can be
rotated 360° and can be easily removed without removing the
solenoid post.
- Slow closing,
No water hammer, surge or noise.
- Cross handle
flow control which will regulate water flow from full on to
completely off.
|
GUARANTEE
Superior Controls
Co., Inc, guarantees the Model 4000 against defective parts and
workmanship for THREE YEARS.
The water-proof
solenoid coil is guaranteed FOR THE FULL LIFE OF THE VALVE.
Downstream
pressure can be adjusted to a desired level. Once set, the downstream
pressure will remain constant regardless of variations in inlet
pressure. Incorporates all features of the 4000 valve.
ADDITIONAL
SPECIFICATIONS FOR 4000 PRS
- Inlet pressure
must be 15 psi greater than regulated outlet pressure.
- Regulating
range 10 to 125 psi.
- Regulating
module fitted with shraeder valve so that pressure readings can be
made with portable gauge.
OPTIONS
- THREADS -
Available with British Standard Pipe Threads.
- SOLENOIDS -
Avallable with latching solenoids (for use with IBOC controllers),
24 VAC, 120 VAC, and 220 VAC conduit mount, and special low wattage
solenoids (contact factory for specifications).
|
