Designed to maintain constant outlet pressure regardless of variations in inlet pressure. Also incorporates all of the features of the Dirty Water Valve with internal self-flushing filter and self-cleaning metering rod.

FEATURES

• Solid brass construction.
• Water-proof solenoid coil, guaranteed for the life of the valve.
• Slow opening, slow closing with no water hammer, surge or noise.
• Regulation is maintained when valve is manually operated with use of internal bleed valve.
• Cross handle flow control which will regulate flow from full on to completely off.
• Diaphragm of one-piece molded construction with integral O-ring seal reinforced with 600 lb. nylon fabric. Diaphragm guaranteed for fifteen years.
• Sizes range from 1 ips through 3 ips.
• Regulating range 10 to 125 psi.
• Regulating module fitted with shraeder valve so that pressure readings can be taken.

SPECIFICATIONS

• Normally closed.
• 24 VAC 50/60 HZ.
• Inlet pressure must be 15 psi greater than regulated outlet pressure.

GUARANTEE

Superior Controls Co., Inc. guarantees Model 950-DWPRS Valves against defective parts and workmanship for THREE YEARS.

The 660 pound test diaphragm is guaranteed for FIFTEEN YEARS. The, water-proof solenoid toil is guaranteed FOR THE LIFE OF THE VALVE.

OPTIONAL THREADS

• Available with British Standard Pipe Threads.

OPTIONAL SOLENOIDS

• Latching solenoid - 12V to 24V pulse (for use with IBOC controllers).
• 24VAC, 110VAC and 220VAC conduit mount.
• 12 VDC.
• Other types available. Contact factory for information.

OPTIONAL ACCESSORIES

• Portable gauge with 24" of hose with end fitting that connects to shraeder valve mounted on regulator.
• Parker gauge mounted on regulator in place of shraeder type valve. Note: This gauge is for initial settings. After that, it can be removed and replaced with spare plug included with valve or be considered expendable. Gauge not covered under warranty.