SNAPLOC™
Revolutionary Waterproof Low-Voltage
Connectors
- BEST LOW-VOLTAGE CONNECTIONS for
Landscape Lighting, Irrigation & More
- 100% WATERPROOF
- QUICK, COMPACT, and EASY
SNAPLOC™ is the low-voltage wire connector
designed for the professional irrigation and landscape lighting
contractor. Unlike twist-on connectors, you never have to doubt
the connection.
Superior Performance When it Counts
- Lawn Irrigation Systems
- Low-Voltage Landscape Lighting
- Security Systems
- Telephone Wire Splices
- Boats, Recreational Vehicles
- Heavy Construction Equipment
SNAPLOC Locks Tight with Double O-Ring Seals
Just squeeze and lock to hydraulically pump and pack
waterproofing silicone. Pre-filled silicone fully encapsulates
all bare wires, closing all entryways against moisture and
corrosion. A double O-ring seal bars water from creeping in, and
latches lock the connector around the wires. SNAPLOC is
vibration-proof and never dangles off the wires.
Say Goodbye to Traditional Connector Problems
Are you familiar with the traditional problems of
"waterproof" low-voltage wiring?
- When you go back to a valve box, do you find connectors
dangling off the ends of the wires?
- When installing, do you twist and twist and the twist-on
connectors still don't grab the wires?
- Do you regularly have to pull out the wires, removing the
silicone with them?
- Do you overtwist and the wires break off inside?
- Do you have to turn your connector upside down so it
doesn't collect water?
- Is it too messy if you ever have to get back into the
connection?
SNAPLOC solves all of these problems with its patented
design.
Eliminate Expensive Call-Backs Because of Faulty Wiring
Professionals generally check the wiring first when examining
a faulty sprinkler system because traditional connectors
regularly fail to maintain the connection and protect it from
moisture and corrosion. SNAPLOC™ is the solution - It's the
economical connector that makes the connection first and seals
it second.
|
"A poor wire connection will always lead to
an expensive and time-consuming call back. A call back
takes time and money out of the contractor's pocket...
Unlike ordinary twist-on wire connectors that
traditionally cause gaps into which moisture can enter
and accumulate, Snaploc wire connectors are
100-percent water resistant."
--Tech
Times, Official quarterly of Irrigator Technical
Training School, CA ("Snaploc...Innovation at Its
Best!", Fall 2001)
|
SNAPLOC™ vs. Twist-On Connectors
| SNAPLOC™ PRE-FILLED WIRE CONNECTORS |
TWIST-ON PRE-FILLED CONNECTORS
("Twist & Hope") |
| SNAPLOC™ works every time with many
different wire combinations. No pre-twisting
necessary. Fast and Easy. |
"Twist & Hopes" are
expensive to purchase and become very expensive when
you have to throw them away because they did not grab
the wires. |
| SNAPLOC™ is designed so that as you
squeeze & lock it, the custom-formulated silicone
is hydraulically pumped and packed, fully
encapsulating all bare wires, closing all entryways. |
"Twist & Hopes" can
release over time because of freezing and thawing,
vibration, heat, and fatigue of the inner spring. |
| SNAPLOC™ wire restraints won't
release, even in the worst conditions, unless you
choose to release them. Fast, easy, and durable. |
First you try to get the right wire
combinations and the right kink in the wires, then you
"Twist & Hope." Quite often you twist
& twist and then remove it to see why it hasn't
grabbed. You now have to throw it away because the
waterproofing gel has been removed with the wires. |
| SNAPLOC™ is among the least expensive
waterproof wire connectors on the market - yet is the
most effective. Works every time. 100% waterproof.
Vibration Proof! |
"Twist & Hopes" whip the
gel causing a tunnel effect allowing entry of moisture
and corrosion. |
Go to: Installation
Instructions | Product
Specifications
|
