|
 |
|
 |
 |
 |
 |
|
|
STANDARD |
10" ROUND |
6" ECONOMY |
JUMBO |
|
|
|
|
|
JUMBO |
 |
PLYMOUTH SUPERFLEXION®
Material |
 |
· |
Stronger than Structural Foam,
Greater Top-Load Strength |
|
· |
More UV and Wear Resistant than
Structural Foam |
|
· |
10 Year Lid Guarantee |
|
Lighter than Cast Iron or
Concrete Boxes |
|
· |
Easier Warehouse Handling |
|
· |
Lower Injuring Potential |
|
Snap Locks on Drop-in Lid |
|
· |
Discourages Vandalism |
|
· |
Keeps Lid Intact in High Water |
|
Lids Are Easily
Interchangeable |
|
Lids Come in Purple |
|
Boxes Are Available in
Black |
|
|
| JUMBO
BOX ASSEMBLIES |
| Reclaimed
Water |
|
Black Box, Purple T-Top, No
Locks |
194505 |
|
Black Box, Purple Lid w/Snap
Lock |
190122 |
|
Black Box, Purple T-Top
w/Pentagon Lock |
194511 |
| BOXES
ONLY |
|
Black |
190101 |
|
Black Box w/Three 6"
Extensions (30" High) |
190130 |
| BOTTOMS |
|
Flat Base for
Jumbo Box - Black (D) |
190132 |
|
| LIDS
ONLY |
| Reclaimed
Water |
|
Purple w/Pentagon
Lock |
192012 |
|
Purple w/Snap
Lock |
192110 |
|
Purple T-Top
(drilled for Snap Locks) |
194012 |
|
Purple T-Top
w/Bolt Hole, No Mach |
194019 |
|
Purple T-Top
w/Bolt Hole, Mach |
194025 |
|
Purple T-Top
w/Bolt & Nut |
194113 |
| EXTENSIONS |
|
6" Black |
190110 |
| ACCESSORIES |
|
Jumbo Lid
Insulator (used with 190135 “Blank” Lid) |
190131 |
|
Lexan
Bolt-Pentagon Lock |
143003 |
|
Lexan Locking
Nut-Pentagon Lock |
143013 |
|
Hexagon Steel
Bolt |
143014 |
|
8" Hinge Pin
(for #172002 & 172114) |
144004 |
|
Snap Lock Set |
144017 |
|
Snap Lock Tool |
144022 |
|
Locator Washer |
143020 |
|
Screw for Locator
Washer |
143004 |
|
| PLYMOUTH SUPERFLEXON BOXES AND COVERS® |
A rigid combination of polyolefin and fibrous
inorganic components. PLYMOUTH SUPERFLEXON® plastic material is
chemically inert and normally unaffected by moisture, corrosion
and the effects of temperature changes. PLYMOUTH SUPERFLEXON®
also has a relatively high tensile strength with light weight
because it is a solid (not foamed) structural material.
PLYMOUTH SUPERFLEXON® covers are NOT traffic covers and should
not be used in roadways, etc. |
| Physical Properties |
ASTM Test
Method |
Minimum
Test Value |
| Tensil Strength (2.0'/min.) |
D-638-82a |
3,400 psi |
| Flexural Modulus |
D-790-81 |
191,000 psi |
| Compressive Strength
(0.05"/min.) |
D-695-80 |
3,350 psi |
| Impact Strength, Izod |
D-256-81 |
0.6 ft. lb/in |
| Durometer Hardness, Type D |
D-2240-81 |
50 |
| Deflection Temp @ 66 psi Stress |
D-648-82 |
230° F |
| Specific Gravity |
D-792-66 (1979) |
1.15 |
|
| | | |
|
|
|
|
