 |
|
 |
 |
 |
 |
|
|
STANDARD |
10" ROUND |
6" ECONOMY |
JUMBO |
|
|
|
|
|
STANDARD |
 |
PLYMOUTH SUPERFLEXION®
Material |
 |
· |
Stronger than Structural Foam,
Greater Top-Load Strength |
|
· |
More UV and Wear Resistant than
Structural Foam |
|
· |
10 Year Lid Guarantee |
|
Lighter than Cast Iron or
Concrete Boxes |
|
· |
Easier Warehouse Handling |
|
· |
Lower Injuring Potential |
|
Snap Locks on Drop-in Lid |
|
· |
Discourages Vandalism |
|
· |
Keeps Lid Intact in High Water |
|
Lids are Easily
Interchangeable |
|
T-Top Lid Will Fit Boxes
of Other Manufacturers |
|
Lids Come in Purple |
|
Boxes Are Available in
Black, Purple and White (12" and 18" High) |
|
|
| STANDARD
BOX ASSEMBLIES |
| Reclaimed
Water (w/2 Mouse Holes) |
|
Black Box, Purple
Lid w/Snap Lock |
170131 |
|
Purple Box,
Purple Lid w/Snap Lock |
170200 |
| Extension
Assemblies |
|
Black Box w/ one
6" Extension, No Lid |
170124 |
|
Black Box w/ two
6" Extensions, No Lid |
170125 |
| STANDARD
18" BOX ASSEMBLIES |
| Reclaimed
Water (w/2 Mouse Holes) |
|
Black 18"
Box, Purple Lid w/Snap Lock |
194519 |
|
White 18"
Box, Purple Lid w/Snap Lock |
194531 |
| BOXES
ONLY |
|
Purple |
170160 |
|
Purple w/2 Mouse
Holes |
170161 |
|
Black |
170101 |
|
Black w/2 Mouse
Holes |
170204 |
|
18" Black
One-Piece w/2 Mouse Holes |
194101 |
|
18" White
One-Piece w/2 Mouse Holes |
194102 |
|
6" Flared -
Black |
170129 |
|
| LIDS
ONLY |
| Reclaimed
Water |
|
Purple w/Snap
Lock |
173143 |
|
Purple
w/Pentagon Lock |
173146 |
|
Purple T-Top Lid,
No Lock |
174003 |
| EXTENSIONS |
|
3" Black |
170102 |
|
6" Black |
170103 |
| ACCESSORIES |
| |
Lexan
Bolt-Pentagon Lock |
143003 |
| |
Lexan Locking
Nut |
143013 |
| |
Hexagon Steel
Bolt |
143014 |
| |
8" Hinge
Pin (for #172002 & 172114) |
144044 |
| |
Snap Lock Set |
144017 |
| |
Snap Lock Tool |
144022 |
| |
Cast Iron Flip
Lid Only |
172002 |
| |
Plastic Flip Lid
Only |
172003 |
| |
Plastic Flip Lid,
Latch and Screw |
172114 |
|
| PLYMOUTH SUPERFLEXON BOXES AND COVERS® |
A rigid combination of polyolefin and fibrous
inorganic components. PLYMOUTH SUPERFLEXON® plastic material is
chemically inert and normally unaffected by moisture, corrosion
and the effects of temperature changes. PLYMOUTH SUPERFLEXON®
also has a relatively high tensile strength with light weight
because it is a solid (not foamed) structural material.
PLYMOUTH SUPERFLEXON® covers are NOT traffic covers and should
not be used in roadways, etc. |
| Physical Properties |
ASTM Test
Method |
Minimum
Test Value |
| Tensil Strength (2.0'/min.) |
D-638-82a |
3,400 psi |
| Flexural Modulus |
D-790-81 |
191,000 psi |
| Compressive Strength
(0.05"/min.) |
D-695-80 |
3,350 psi |
| Impact Strength, Izod |
D-256-81 |
0.6 ft. lb/in |
| Durometer Hardness, Type D |
D-2240-81 |
50 |
| Deflection Temp @ 66 psi Stress |
D-648-82 |
230° F |
| Specific Gravity |
D-792-66 (1979) |
1.15 |
|
| | | |
|
|
|
|
