|
 "NSI"
Series
NonStop Inline Drip Tubing |
 |
Benefits
- Requires low-maintenance
30-mesh filer.
- Most reliable product
for clog-resistance .
- Reduces costs associated
with system maintenance.
- Ideal for use in below
ground installations.
- Smooth profile virtually
eliminates emitter snagging.
- Factory insertion into
tubing, wit emitters spaced to your specifications.
|
|
| How it
works |
1.
Under normal conditions, there is a slight pressure differential across
each orifice in the silicone diaphragm.
2. As a particle encounters the orifice, there is a momentary obstruction,
causing the differential pressure across the orifice to increase
greatly. This pushes the particle through the expanding orifice.
3.
The particle is then flushed through the
orifice, which instantly returns
to its normal size. Normal pressure conditions are restored.
The particle continues through the remaining orifices in the diaphragm and
out of the NonStop emitter.
|
NSI - 18mm Series .695 in. O.D.
(nominal) .605 in. I.D. (nominal)
Maximum number of
emitters and lateral run
+/- 5%
allowable flow variation; level ground
|
Flow Rate GPM |
Emitter
Spacing (inches) |
| 18 |
24 |
30 |
36 |
42 |
| No. |
Len.
(ft) |
No. |
Len.
(ft) |
No. |
Len.
(ft) |
No. |
Len.
(ft) |
No. |
Len.
(ft) |
| 0.6 |
224 |
337 |
202 |
405 |
186 |
467 |
174 |
524 |
165 |
578 |
| 1.0 |
162 |
243 |
146 |
292 |
134 |
337 |
126 |
378 |
119 |
417 |
| 2.0 |
104 |
156 |
94 |
188 |
86 |
217 |
81 |
243 |
76 |
268 |
NSI - 20mm Series .790 in. O.D.
(nominal) .690 in. I.D. (nominal)
Maximum number of
emitters and lateral run
+/- 5%
allowable flow variation; level ground
|
Flow Rate GPM |
Emitter
Spacing (inches) |
| 18 |
24 |
30 |
36 |
42 |
| No. |
Len. (ft) |
No. |
Len. (ft) |
No. |
Len. (ft) |
No. |
Len. (ft) |
No. |
Len. (ft) |
| 0.6 |
282 |
423 |
254 |
508 |
234 |
586 |
219 |
658 |
207 |
725 |
| 1.0 |
203 |
305 |
183 |
367 |
169 |
423 |
158 |
475 |
149 |
524 |
| 2.0 |
130 |
196 |
118 |
236 |
108 |
272 |
101 |
305 |
96 |
337 |
|
