The “Pop-Top” Flush Cap: Extra Performance Engineered
from the Top Down
The innovative design of the Hunter Pro-Spray flush cap –
with its convenient pull ring that allows for easy pull up of
the riser – makes installation quicker and easier. Not to
mention, cleaner. During flushing operations the flush plug is
designed for positive riser pop-up, as water pressure opens
the flap to permit controlled directional flushing that cleans
the system. The plug then closes and, while in the retracted
position, the spring loaded, self-sealing mechanism prevents
debris from entering the riser. The result: no more nozzle
plugging and debris-related callback problems.
|
|
Pro-Spray Models
PROS-04 – 4" Pop-up (10 cm)
PROS-06 – 6" Pop-up (15 cm)
PROS-12 – 12" Pop-up (30 cm)
Dimensions
- Overall height:
PROS-04 – 5 7/8" (15.5 cm)
PROS-06 – 8 3/4" (22.5 cm)
PROS-12 – 16 1/8" (41 cm)
- 1/2" female inlet NPT
- Exposed diameter: 2 1/4" (5.7 cm)
Operating Specifications
- Pressure range: 15 to 70 psi (1.0 to 4.8 bars; 103 to 482 kPa)
- Flow-by: 0 at 10 psi (.07 bars; 68 kPa) or greater; .1 gpm (0,02
m3/hr; 0.4 l/min) otherwise
- Precipitation rates: approximately 1.5" (38 mm) per hour
Options Available
- Optional factory-installed drain check valve for up to 7' (2.1
m) elevation change; “Check Valve” stamped on cap for easy ID
- Optional field-installed reclaimed water identification cap
(Part number 469800)
PRODUCT
EXPLANATION
|
| EXAMPLE:
PROS
- 04 - CV - 15H |
MODEL
PROS = Pro-Spray |
POP-UP
HEIGHT
04 = 4' Pop-up
06 = 6' Pop-up
12 = 12' Pop-up |
OPTIONS
CV = Factory Installed Drain Check Valve |
NOZZLE
SERIES
15 Series |
PATTERN
Half Circle |
|
