Products       That Work ........ Smart
Home | Site Map | Sales Contact | Lighting | Agriculture | Turf | Golf | Pivot Alert | Pools |  Search | Register | Order Now | Credit Ap
950-DW DIRTY WATER VALVE

950-DW Dirty Water Valve
Self Cleaning
Metering Rod

IPS SIZE DIMENSIONS
A B
¾" 3¼" 5"
1" 4 3/8" 4½"
1¼" 5" 5½"
1½" 6" 8"
2" 7" 9"
2½", 3" 11 5/8" 10"
IPS SIZE RATE OF FLOW IN GALLONS PER MINUTE
  5 10 15 20 30 40 50 60 70 80 90 100 120 140
¾" .45 1.75 4.00 7.00 15.50 23.00                
1" .16 .75 1.50 2.60 5.70 10.00 15.95 22.03            
1¼"     .48 .85 1.90 3.50 5.30 7.60 10.10 14.82 17.54 21.18    
1½"       .45 1.00 1.70 2.65 3.80 5.10 6.60 8.30 10.09 14.82 19.03
2"           .53 .82 1.20 1.60 2.05 2.60 3.20 4.60 6.30
PRESSURE LOSS IN POUNDS PER SQUARE INCH

TWO WAY PROTECTION

The most vulnerable part of all solenoid operated diaphragm valves is the solenoid assembly and chamber. Sand or other foreign matter in the water can cause plungers to jam, orifices to clog and prevent valve closure. To protect against this possibility, the 950 DW Valve is equipped with an internal self-flushing filter as well as a self-cleaning metering rod, so only "clean" water can enter the solenoid chamber.

FEATURES

  • Solid brass construction.
  • Water-proof solenoid coil, guaranteed for life of the valve.
  • Coil can be rotated 360° and easily removed without removing solenoid operator.
  • Slow closing. No water hammer, surge or noise.
  • Manual operation in the event of power failure with a solid brass heavy duty drain cock.
  • Pressure rating at 200 p.s.i.
  • Cross handle flow control standard on 1" through 3" sizes, optional on 3/4" size.
  • Diaphragm of one-piece molded construction with integral O-ring seal reinforced with 600 lb. test fabric.
  • Stainless Steel insert seat in solenoid chamber.

 

IPS Size RATE OF FLOW IN GALLONS PER MINUTE
0 100 140 160 200 240 280 320 360
2½" 2.38 2.5 2.9 4.0 6.0 8.2 10.7 13.2
3" 2.38 2.5 2.9 4.0 6.0 8.2 10.7 13.2

OPTIONAL THREADS

  • Available with British Standard Pipe Threads.

OPTIONAL SOLENOIDS

  • Latching solenid -12V to 24V pulse (for use with IBOC controllers).
  • 24 VAC, 110 VAC and 220 VAC conduit mount.
  • 12 VDC.
  • Other types available. Contact factory for information.

GUARANTEE

Superior Controls Co., Inc. guarantees Model 950 Automatic Electric Diaphragm Globe Valves against defective parts and workmanship for THREE YEARS.

The 600 pound test diaphragm is guaranteed for FIFTEEN YEARS. The water-proof solenoid coil is guaranteed FOR THE LIFE OF THE VALVE.



 
Send mail to webmaster lross@uicorp.net with questions or comments about this web site
Copyright © 2000 Underhill International Corporation
Last modified: December 06, 2007