CAUTION: Blade is very sharp. Keep away from children.
TO ADJUST:
Depress pivot screw on spring side. Slide inner
handle to new position. Be certain that pivot screw
locks into position on opposite side.
Use "S" position for materials up to
1" O.D. Use "M" position for materials
approximately 1 1/4" to 1 1/2" O.D. Use
"L" position only for soft materials up to
2" O.D.
TO OPEN:
Use easy-open trigger for quick, one-handed
operation. Place cutter on pipe as shown.
TO CUT:
Squeeze gently and rotate handles at start of cut.
Continue to squeeze gently and rotate handles up and
down throughout cut. Cut slowly at end of cut.
CAUTION:
Do not cut metal or any material harder than plastic. Do not
squeeze with great force. Do not snap-cut pipe. Move handles
only in line with cut. Wear eye protection. Keep away from
children.
