|
F44
 DESCRIPTION
Full circle impact sprinkler. 3/4" male thread in the F44 model. 3/4"
female thread in the F44F model.
For general purpose agricultural usage, fixed or movable solid sets. This model
is very suitable for where working conditions would be specially hard for most
plastic sprinklers.
Very tough sprinkler, with reinforcement ribs on its body. It arm is made of
fiberglass reinforced polyamide and its arm bearing turns on a stainless steel
fulcrum pin. Sand proof bearing set. It can be equipped with one or two nozzles.
Just like every Unirain model, three different kinds of vanes can be used to
achieve the desired throw radius - pulverisation balance according to the system
pressure.
| Pressure (psi) |
Nozzles |
Vanes |
| High: 60 |
3RN / 3RN-P or 3FCN |
30V |
| Medium: 40 |
3RN / 3RN-P or 3FCN |
Less vane |
| Low: 30 |
3RN / 3RN-P |
30VR |
| Very Low: 20 |
3RN / 3RN-P |
30VB |
|
