-
Specifications PDF
XPR Pressure Regulator - The Weathermatic XPR
Pressure regulator senses inlet pressure and maintains
constant outlet pressure (see PRK-24 in valve
accessory section for specifications)
Non-potable Alert Solenoid; may be substituted for
standard model (specify XS24NP)
Chloramine resistant Albino Rhino Diaphragm (Specify -
D)
200 psi(3,8 bar) rating
Wiring requires a single lead from the controller to
each solenoid, plus a common neutral to all solenoids;
type UF wire, U.L. listed, in recommended for all
hookups.
24 VAC/60 Hz 24 VAC/50 Hz
Inrush: 9.86 VA Inrush: 10.7 VA
Holding: 5.69 VA Holding: 7.5 VA
Do not use nominal voltage ratings listed above for
sizing of valve wire chart
|
 |
